Website Templates by IceTemplates.com
This is the most important configuration of the DVR.
When you select ‘RECORD SETUP’ in the main menu, you can see the window as
shown on the left.
1) RECORD SETUP
You can change setup value by using a mouse.
(1) CHANNEL : CHANNEL select
(2) QUALITY : Set recording picture quality.
(There are five quality steps)
- LOWEST
- LOW
- NORMAL
- HIGH
- HIGHEST
Unless you selected other recording mode, DVR system records in Schedule
Recording mode. In Schedule Recording mode, you set type of recording by 1
hour time interval.
Default frame rate for continuous recording speed is 30 FPS.
* Each type is indicated in different color of boxes. You
can set up schedule by dragging a mouse and all blocks can be activated or
deactivated by using ‘ALL’ button.
* Default setting is continuous recording.
To send more images via IP network and longer recording time, set Quality at ‘LOW’ or ‘NORMAL’ and record at 360x240.
Data size of image in PAL system is a little bigger than NTSC system, but the total recording time is same as in NTSC system.
(3) RESOLUTION : Set recording resolution
- 704x240(NTSC) , 720x288(PAL)
- 352x240(NTSC) , 360x288(PAL) [ DEFAULT ]
(4) FRAME RATE : Set FRAME
1 30 FPS(NTSC) [ DEFAULT 7.5 FPS ]
When you click CONFIGURATION’ on the main menu, you can go to ‘CONFIGURATION’
menu as shown on the right.
1) HDD MANAGEMENT
You can see HDD Model name, serial number, number of blocks and size of HDD. You can also clearthe HDD. (While you are in this HDD MANAGEMENT Mode, DVR does NOT record.)
2) TIME/DATE SETUP
In this setup, you can select date/time of DVR system and display format.
You can adjust values by using a mouse wheel or left/right
button of a mouse.
* For the first time installation, date/time setup must be completed first.
DATE FORMAT : DATE(ASIAN/EUROPEAN/AMERICAN)
HOUR FORMAT : (2H/24H)
MONTH FORMAT : (ENGLISH,NUMERIC)
3) CAMERA SETUP
You can setup values for each camera.
(1) CHANNEL : You can select a channel which you want to change values.
(2) TITLE : You can name each camera with 8 digit numbers or letters combination.
Move a cursor onto a location that you want and choose numbers or letters
by using mouse wheel or left/right button of a mouse. To exit to the previous
menu mode, click 'ESC'.
DEFAULT = CAM01___ CAM03___
(3) COLOR : You can adjust color of image display of each camera by a mouse.
BRIGHTNESS : Adjusting brightness ( -32 31 ) [ DEFAULT = 0 ]
CONTRAST : Adjusting contrast ( -32 31 ) [ DEFAULT = 0 ]
SATURATION : Adjusting saturation ( -32 31 ) [ DEFAULT = 0 ]
HUE : Adjusting hue ( -32 31 ) [ DEFAULT = 0 ]
(4) Executing Buttons
ALL : Initializing all values for all channel as a default setting value.(CH1 CH4)
DEFAULT : Initializing all values for the applied channel only as a default setting value.
ESC : Used to exit
4) MOTION SETUP
